Global Sheet Molding Compound (SMC) Market Research Report 2011-2023


  • “Summary
    Sheet molding compound (SMC) is both a process and reinforced composite material. The composite is a “ready to mold” glass or carbon fiber reinforced polyester material primarily used in compression molding. The SMC sheets are manufactured by dispersing long strands of chopped glass fibers or carbon fibers on a bath of polyester resin, vinylester resin or epoxy resin.SMC materials are thermosets and contain glass or carbon reinforcement levels between 10 and 60 %. The longer fibers in SMC result in better strength properties than standard bulk molding compound (BMC) products. Typical applications include demanding electrical applications, corrosion resistant needs, structural components at low cost, automotive, and transit. SMC delivers high surface quality. SMC is used for larger parts where higher mechanical strength is needed.
    The global Sheet Molding Compound (SMC) market will reach xxx Million USD in 2017 with CAGR xx% from 2018-2023. The objective of report is to define, segment, and project the market on the basis of product type, application, and region, and to describe the content about the factors influencing market dynamics, policy, economic, technology and market entry etc.
    Based on products type, the report describes major products type share of regional market. Products mentioned as follows:
    General Purpose SMC
    Flame Resistance SMC
    Electronic Insulators SMC
    Corrosion Resistance SMC
    Others
    Leading vendors in the market are included based on profile, business performance etc. Vendors mentioned as follows:
    IDI Composites International
    Magna
    Menzolit
    Continental Structural Plastics
    Premix
    Polynt
    Molymer SSP
    ASTAR
    Core Molding Technologies
    Lorenz
    MCR
    Huamei New Material
    Yueqing SMC & BMC
    Tianma Group
    Jiangshi Composite
    Huayuan Group
    BI-GOLD New Material
    Changzhou Rixin
    DIC
    East China Sea composite materials
    Fangda Thermoset Plastic
    SIDA composites
    Fu Runda Group
    Devi Polymers
    Based on Application, the report describes major application share of regional market. Application mentioned as follows:
    Automotive and Commercial Vehicle
    Electrical & Energy
    Construction
    Others
    Based on region, the report describes major regions market by products and application. Regions mentioned as follows:
    Asia-Pacific
    North America
    Europe
    South America
    Middle East & Africa”

     


  • “Table of Contents
    1 Market Overview
    1.1 Objectives of Research
    1.1.1 Definition
    1.1.2 Specifications
    1.2 Market Segment
    1.2.1 by Type
    1.2.1.1 General Purpose SMC
    1.2.1.2 Flame Resistance SMC
    1.2.1.3 Electronic Insulators SMC
    1.2.1.4 Corrosion Resistance SMC
    1.2.1.5 Others
    1.2.2 by Application
    1.2.2.1 Automotive and Commercial Vehicle
    1.2.2.2 Electrical & Energy
    1.2.2.3 Construction
    1.2.2.4 Others
    1.2.3 by Regions
    2 Industry Chain
    2.1 Industry Chain Structure
    2.2 Upstream
    2.3 Market
    2.3.1 SWOT
    2.3.2 Dynamics
    3 Environmental Analysis
    3.1 Policy
    3.2 Economic
    3.3 Technology
    3.4 Market Entry
    4 Market Segmentation by Type
    4.1 Market Size
    4.1.1 General Purpose SMC Market, 2011-2016
    4.1.2 Flame Resistance SMC Market, 2011-2016
    4.1.3 Electronic Insulators SMC Market, 2011-2016
    4.1.4 Corrosion Resistance SMC Market, 2011-2016
    4.1.5 Others Market, 2011-2016
    4.2 Market Forecast
    4.2.1 General Purpose SMC Market Forecast, 2017-2022
    4.2.2 Flame Resistance SMC Market Forecast, 2017-2022
    4.2.3 Electronic Insulators SMC Market Forecast, 2017-2022
    4.2.4 Corrosion Resistance SMC Market Forecast, 2017-2022
    4.2.5 Others Market Forecast, 2017-2022
    5 Market Segmentation by Application
    5.1 Market Size
    5.1.1 Automotive and Commercial Vehicle Market, 2011-2016
    5.1.2 Electrical & Energy Market, 2011-2016
    5.1.3 Construction Market, 2011-2016
    5.1.4 Others Market, 2011-2016
    5.2 Market Forecast
    5.2.1 Automotive and Commercial Vehicle Market Forecast, 2017-2022
    5.2.2 Electrical & Energy Market Forecast, 2017-2022
    5.2.3 Construction Market Forecast, 2017-2022
    5.2.4 Others Market Forecast, 2017-2022
    6 Market Segmentation by Region
    6.1 Market Size
    6.1.1 Asia-Pacific
    6.1.1.1 Asia-Pacific Market, 2011-2016
    6.1.1.2 Asia-Pacific Market by Type
    6.1.1.3 Asia-Pacific Market by Application
    6.1.2 North America
    6.1.2.1 North America Market, 2011-2016
    6.1.2.2 North America Market by Type
    6.1.2.3 North America Market by Application
    6.1.3 Europe
    6.1.3.1 Europe Market, 2011-2016
    6.1.3.2 Europe Market by Type
    6.1.3.3 Europe Market by Application
    6.1.4 South America
    6.1.4.1 South America Market, 2011-2016
    6.1.4.2 South America Market by Type
    6.1.4.3 South America Market by Application
    6.1.5 Middle East & Africa
    6.1.5.1 Middle East & Africa Market, 2011-2016
    6.1.5.2 Middle East & Africa Market by Type
    6.1.5.3 Middle East & Africa Market by Application
    6.2 Market Forecast
    6.2.1 Asia-Pacific Market Forecast, 2017-2022
    6.2.2 North America Market Forecast, 2017-2022
    6.2.3 Europe Market Forecast, 2017-2022
    6.2.4 South America Market Forecast, 2017-2022
    6.2.5 Middle East & Africa Market Forecast, 2017-2022
    7 Market Competitive
    7.1 Global Market by Vendors
    7.2 Market Concentration
    7.3 Price & Factors
    7.4 Marketing Channel
    8 Major Vendors
    8.1 IDI Composites International
    8.1.2 Profile
    8.1.2 Business Performance (Sales Revenue, Cost, Gross Margin)
    8.2 Magna
    8.2.1 Profile
    8.2.2 Business Performance (Sales Revenue, Cost, Gross Margin)
    8.3 Menzolit
    8.3.1 Profile
    8.3.2 Business Performance (Sales Revenue, Cost, Gross Margin)
    8.4 Continental Structural Plastics
    8.4.1 Profile
    8.4.2 Business Performance (Sales Revenue, Cost, Gross Margin)
    8.5 Premix
    8.5.1 Profile
    8.5.2 Business Performance (Sales Revenue, Cost, Gross Margin)
    8.6 Polynt
    8.6.1 Profile
    8.6.2 Business Performance (Sales Revenue, Cost, Gross Margin)
    8.7 Molymer SSP
    8.7.1 Profile
    8.7.2 Business Performance (Sales Revenue, Cost, Gross Margin)
    8.8 ASTAR
    8.8.1 Profile
    8.8.2 Business Performance (Sales Revenue, Cost, Gross Margin)
    8.9 Core Molding Technologies
    8.9.1 Profile
    8.9.2 Business Performance (Sales Revenue, Cost, Gross Margin)
    8.10 Lorenz
    8.10.1 Profile
    8.10.2 Business Performance (Sales Revenue, Cost, Gross Margin)
    8.11 MCR
    8.12 Huamei New Material
    8.13 Yueqing SMC & BMC
    8.14 Tianma Group
    8.15 Jiangshi Composite
    8.16 Huayuan Group
    8.17 BI-GOLD New Material
    8.18 Changzhou Rixin
    8.19 DIC
    8.20 East China Sea composite materials
    8.21 Fangda Thermoset Plastic
    8.22 SIDA composites
    8.23 Fu Runda Group
    8.24 Devi Polymers
    9 Conclusion”

     

  • Your Name (required)

    Your Email (required)

    Telephone Number (required)

    Name of Company (required)

    Designation (required)

    Country Name (required)

    How can we help you?

    Prove You are Human (required)

    captcha
    Enter Capcha Image Properly

  • Your Name (required)

    Your Email (required)

    Telephone Number (required)

    Name of Company (required)

    Designation (required)

    Country Name (required)

    How can we help you?

    Prove You are Human (required)

    captcha
    Enter Capcha Image Properly